Regarding the above prices, the total cost of felling trees should include cutting the tree into a small stump, chopping and dragging its branches, and cutting its trunk into manageable sections. Hauling, chipping and splitting logs are three common ways in which tree care companies can remove remaining debris. Finally, power companies may offer to remove a tree free of charge if this poses a safety hazard to power lines. An arborist can measure the inner health of a tree with a strength test to determine if the tree is solid, decayed, or hollow.
If a street needs to be completely or partially closed, the cost of traffic control, cones and flags will increase the cost of removing trees. Tall, thin trees, such as poplars, cannot support a person's weight, so additional equipment is needed to reach the top of the tree safely. The height of the tree is obvious, so I'm not going to go into too much detail, but the bigger the tree, the more you'll pay. During the tree removal process, some existing gardens could be damaged due to equipment or falling branches.
Certain types of trees, such as western red cedar, rosewood, and black cherry trees, especially those with a tree height of more than 30 feet. But if your tree doesn't need to be removed immediately, cutting down a tree (or cutting down a fallen tree) between late winter and early spring may be the most convenient time. A tree can survive for years with a hollow trunk, but a hollow tree becomes unstable without the usual support structure. There's a little more information on why the prices are the same so you can get an idea of what it might cost to remove your small tree.
A certified arborist will know if your tree is a protected species and will need permission to extract it. Large trees can cost a lot depending on the large amount of wood contractors need to remove them. Large trees can also have an infestation or disease, requiring additional care during extraction and increasing the cost.
